Home :: Request Layout:: Alpine SnowGuards® Request Layout Form < Back >
Snow Guard Layout Form Printable version of our Snow Guard Layout Request Form This form can be downloaded as a PDF that can be printed and faxed or mailed to us so that we may provide you with a Job Specific Recommendation. [ snowguard-request-form.pdf 241K]

Alpine SnowGuards® Request Layout Form

Use this form to receive a Job Specific Recommendation for your snow retention project. Your recommended layout for a snow guard system will be based on the information provided. We request that you provide us with the Ground Snow Load (Pg) for the project and other roof information listed. If you do not have the ground snow load we will try to estimate to the best of our ability. We cannot estimate areas that are designated as CS (Case Studies), typically mountainous areas. If we do have a Ground Snow Load for a CS area, we will use it as an estimate but it is up to us to verify all information used in our calculations.

Some of the information needed for a Recommended Layout:

  • Length along the eave
  • Distance from the eave to the peak (rafter length)
  • Number of roofing squares - generally only needed for pad-style snow guards.
  • Roof pitch (or slope)
  • Ground snow load (Pg)

Fields marked in bold are required. If you don't fill in all required info, we will need to contact you and that may delay your quote.
Contact Info:

Please provide as much information as possible. Make sure you enter your contact name, company, phone, fax and email so we can get in touch with you if we need more information. Not providing all necessary information through this form will delay your recommended layout and quote.
Company Name:
Contact First/Last Name:
Email: name@domain.com
Phone Number: ###-###-####
Fax: ###-###-####
Address 1:
Address 2:
City:
State or Province:
Zip/Postal Code:
Country:
Company Name - please enter the name of the company requesting this layout, if you are an individual please enter homeowner.
Contact Name - please enter your name so we know who to contact.
Email - email is a quick and easy way to send you your layout information. By entering your email we can send you information for your project and notify you of shipping with a tracking number.
Phone & Fax Number - enter a phone number and if available a fax number so we can contact you.
Address - please enter your address, not the project address, that comes below.

Project Information:
Project Name:
Project County:
Project City, State/Province: ,
Snow Load: psf
Bid Due Date:
Project Name - please enter a unique name for this project so we can all avoid confusion.
Project County, City, State - please enter the county (if known) city, state and country for the project location.
Snow Load - The Ground Snow Load is necessary for all recommended layouts, this information is generally available from your local building office or from the building plans. We can try to estimate but it is your responsibility to verify this information.

Roof Conditions - Critical Conditions To Plan For:
Are there upper roofs that dump on to lower roofs? Yes No
If you answered yes to any of these critical conditions, you will need to enter detailed information in the comment section at the bottom of this form.
Are there drifting conditions experienced or expected on the roof? Yes No
If yes, then what is the expected drift snow load? psf
Are there icing conditions anywhere on the roof? Yes No
If yes, then what is the expected ice load? psf
Are there existing snow guards on this roof? Yes No
Upper Roofs - if upper roofs are dumping snow onto lower roofs this must be considered in the recommended layout. Use the comment field at the bottom of this form to provide more information.
Drifting or Icing Conditions - if drifting or icing have been experienced on this roof or is expected, this must be considered for the recommended layout. You may need to contact an engineer to find this information.
Existing Snow Guards - let us know if there are existing snow guards or if this is an new installation. Use the comment field below to let us know if you are replacing the existing snow guards or adding to them.

Application Information:
New or Existing Roof? New Roof Existing Roof
Roof Type: Slate Synthetic Slate Comp Shingle Metal SSR Flat Tile Round Tile
Cedar Shake Metal Shingle Metal Panel Membrane Other
Other:
Type of Snow Guard Requested: Pad Style Aluminum Pad Style Copper Pad Style Zinc Pad Style Galvalume
Pipe Style Aluminum/Stainless Pipe Style Brass
ColorGard
Other/Undecided
Model Number: If known.
Snow Guard Material/Finish Requested: Mill Finish Painted/Powder Coated Other
If painted or powder coated, enter the color below. If "other" enter information in the comment field below.
Color: If known.
Pipe Style/Powder Coat Chart - Pad Style Color Chart - Note: The #80 uses the Tiger Drylac Powder Coatings Chart.

Click on one of the tabs below and fill in your roof information for this project.

Click on one of the tabs to choose the roof type for this project and fill in all of the information.

For metal standing-seam, through-fastened metal or metal shingle roofs choose the Metal Roof tab.

For all manufactured - synthetic slate, shake or shingle roofs and for all tile roofs, you should fill in the manufacturer, model and size.
Metal Roof Information:
Panel Width: inches

Standing Seam Roofs
double lock seam
Double Lock		 single lock seam
Single Lock "L" Seam
tee seam rib
Tee Seam		 zip rib
Zip Rib
seam height
Seam Height: inches
Seam Configuration:
Panel Manufacturer:
Panel Model:
Panel Gauge:
Panel Material:
Panel Finish:
Panel Color:
Slate/Tile/Shake/Shingle Roof Information:
Slate/Tile Width: inches

To Speed Up Your Recommended Layout & Quote:

Please supply as much information as possible so we can provide you with a timely and correct, recommended layout. For pipe-style snow guards we need the height and width of the slate for the base plates.

For Existing Slate Roofs we need the slate width, height, thickness and overlap or exposure.

For Tile Roofs we need the manufacturer and model or the width,height and thickness. Some tile models come in different lengths, please specify the length.

For Cedar Shake/Shingle Roofs we need all of the measurments.

For All Synthetic Roofs we need the manufacturer, model and size.

For Composition Shingle Roofs we don't really need any additional information.
Slate/Tile Height: inches
Slate/Tile Thickness: inches
Roofing Squares:
Overlap: inches
Exposure: inches
Manufacturer:
Model:
Membrane Roof Information:
Manufacturer:
Model: Decor Rib, etc.
Color:
Rib Spacing:
Insulation Thickness or Woodblock:

Click on one of the tabs below and fill in your roof measurements for this project.

Sloped/Flat Roof Information
Roof
Pitch		 Length of eave "A" Distance from eave to peak "B" Use Sloped/Flat Roof for all flat, hip, gambrel, shed, salt box, etc. roofs - any roof that is not a barrel. Use the comment field at the bottom of the page to add additional roof information.
snow guard roof layout
Note: Each roof section should be listed, if you are doing both sides of a roof, measurements for both sides should be entered.
Roof Area 1 :12
Roof Area 2 :12
Roof Area 3 :12
Roof Area 4 :12
Roof Area 5 :12
Barrel Roof Information
Radius Height "H" Length along the eave "A" snow guard roof layout for barrel roof
Roof Area 1
Roof Area 2
Roof Area 3
Roof Area 4
Roof Area 5


Message/Questions/Comments/Additional Information:
Use the comment box to add any additional roof information or to describe conditions that will affect the snow guard layout. Use this area to add additional information about hip roofs, etc.

* If you need the quote by a certain date/time, please note it here. DO NOT USE 'ASAP', as all orders are 'ASAP' to us!
 
Homw Home